Release time:

2023-11-23

The standard operation of the bag making machine is as follows: 1. Preparations before starting ① Check whether there is dust and debris around the device, and remove it. ②Finish the film roll according to the requirements of the production notice. ③ Adjust the size of the bag according to the production notice and process documents, install the heat sealing knife, and adjust it initially. ④Position of slitting knife and heat sealing knife. ⑤Turn on the power and set the temperature of the heat sealing knife according to the requirements of the process documents. ⑥Enter the relevant data of bag making and the required number of each pie. ⑦Select the pattern edge with large color difference to adjust the light-eye sensitivity to the left and right to make it meet the requirements. 2. Power on ① Start the main motor, run at low speed, then adjust the side position control, and split the membrane in the middle position. ②Adjust the left and right nip rollers to align the left and right films, and adjust the front and back nip rollers to align the pattern. ③ Adjust the heat sealing knife so that it is heat sealed within the required range of the bag. ④Adjust the cutting blade to the desired position, and adjust the punching position to the scissors mouth. ⑤ Initially adjust the machine speed, take a flat sample bag for initial inspection. ⑥ During the production process, observe the bag-making situation at any time and find that it is abnormal, and adjust it immediately. 3. Shutdown Turn off the main power switch, and then turn off each part of the power switch.

Key words: